Copper balls are used in various electrical appliances and switches. Copper balls are relatively soft and easy to punch. They are usually also used in valves and crafts.

Characteristics: (H62/65) copper balls, usually used in various electrical appliances and switches, copper balls are softer and easier to perforate, and are usually used on valves and crafts.

Size: from 0.5mm-60mm ball can be produced

The copper ball valve is just one of the commonly used style in commercial valves. The other style will have several other angles of valves as well. The proper angle for the copper angle valve depends on whether you are using the valve in a closed environment or an open environment. In both cases, the copper angle radiator valves will be used, the difference being in the range of temperature that the valve will regulate.

If you are using the copper ball valve in a closed environment then it is necessary to have the copper ball material to be precise. Too much copper ball material is not good, because the angle of the valve can be too narrow. This can lead to the flow of gas not being sufficient. The proper diameter of the ball must be set to regulate the flow of gas into a specific system. The right degree of angle is required to ensure that the valve will be effective.

The other style of valve is the free flow valve where the copper ball will move up and down along the path of the motion of the ball. The problem with this style is that there is not enough copper ball to regulate the stream of gas. If you are using this type of valve then you may need to use a diaphragm to keep the flow of gas inside the system. The ball will move up and down in a planar fashion. To get a proper flow rate of gas into the system the valve must be closed.